How to replace an ink cartridge using the ink button?(2)

How to replace an ink cartridge using the ink button?(2)

Remove the new ink cartridge from its protective bag. Place the ink cartridge vertically into the

cartridge holder. Then, push the ink cartridge down until it clicks into place. Do not apply excessive

force to the cartridge.
epson ink cartidge
Caution:
Be careful not to break the hooks that are on the side of the ink cartridge when you remove it from
the package.

Do not remove or tear the label on the cartridge; otherwise, ink will leak.
Do not touch the green IC chip on the side of the cartridge. This can damage the ink cartridge.

If an ink cartridge should be removed temporarily from the printer, be sure to protect the ink supply
area of the ink cartridge from dirt and dust. Store the ink cartridge in the same environment as the
printer. When storing the cartridge, be sure that it stands as shown in the illustration below (the label
that identifies the color of the ink cartridge should be displayed on the top of the cartridge). The valve
in the ink supply port is designed to contain any excess ink that may be released. However, careful
handling is recommended. Do not touch the supply port of the ink cartridge or its surrounding area.

Be sure to always install an ink cartridge into the printer immediately following the removal of an old ink
cartridge. Failure to promptly install the ink cartridge may cause the print head to dry out and render it
unable to function properly.
When you are finished replacing the cartridge, close the cartridge cover and the printer cover.
Press the  ink button. The printer moves the print head and begins charging the ink delivery system.
The  ink lights start flashing. This process takes about one minute to complete. When the ink charging process
is finished, the printer returns the print head to its home position. The  power light will stop flashing and remain
on, and the  ink out light will turn off.
epson printer

Caution:
The  power light will continue to flash while the printer is charging ink. Never turn off the printer while this light is
flashing.
Note:
If the ink end error occurs after the print head moves to its home position, the ink cartridge may not be installed
properly. Press the  ink button again, and reinstall the ink cartridge until it clicks into place.

Follow us: