How to replace an ink cartridge using the ink button?(1)

How to replace an ink cartridge using the ink button?(1)

To replace an ink cartridge using the  ink button, follow the steps below.

1.Make sure that the printer is on. The  power light should be on, but not flashing.
2.Lower the output tray, then open the printer cover.
3.Press the  ink button. The print head moves to the ink cartridge replacement position, the  power
light beginsto flash, and the  ink out light corresponding to the ink cartridge that needs to be replaced
begins to flash or remains on.

Note:
Do not press the  ink button for more than three seconds. The print head cleaning command will
be initiated if the  ink button is pressed for more than three seconds.

Caution:
Do not move or force the print head by hand, as this may damage the printer. Always press the  ink
button to move the print head.

4. Open the cartridge cover. Pinch the sides of the ink cartridge that you want to replace. Lift the
cartridge out of the printer and dispose of it properly. Do not take the used cartridge apart or try to
refill it.

Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flus
them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a
doctor immediately.

Note:
For best results, shake the new ink cartridge four or five times before opening the package.

Do not shake the ink cartridge after removing from the bag; this can cause leakage.

Follow us: